Leds: Support And Diagnostic Functions; Interpreting Instant Internet Leds - Nortel BayStack Instant Internet 400-S User Manual
Nortel baystack 400-s: user guide
Hide thumbs
Also See for BayStack Instant Internet 400-S:
- Using manual (344 pages) ,
- Install manual (104 pages) ,
- Reference (98 pages)
Table of Contents
Advertisement
Chapter 6
LEDs: support and diagnostic functions
This chapter describes how the LEDs work on your Instant Internet 400-S unit and
how you can use them to interpret activity on your unit.
Interpreting Instant Internet LEDs
The front panel of the Instant Internet 400-S unit has two sets of LEDs, the eight
LEDs on the left indicate failures and operational status of the unit. The Power
LED is always lit when your unit is turned on. The 14 LEDs at the bottom, center
of the unit, display status and settings for the seven-port switch.
Figure 7
illustrates the LEDs on the front of the Instant Internet 400-S unit.
Setting Up the BayStack Instant Internet 400-S Unit
61
Advertisement
Table of Contents
