Available Options - Nortel BayStack Instant Internet 400-S User Manual

Nortel baystack 400-s: user guide
Hide thumbs Also See for BayStack Instant Internet 400-S:
Table of Contents

Advertisement

26
Chapter 1 Introduction
Important Information for the BayStack Instant Internet (Part number
307603-E)
Installing the BayStack Instant Internet Management Software Version 7.11
(Part number 209226-B)
BayStack Instant Internet Software and Documentation Version 7.11 CD
(Part number 206664-D)
For contents, see

Available options

The Instant Internet 400-S unit is shipped with several options. The standard unit
includes a seven-port autosensing, autonegotiating 10/100 Ethernet switch on the
front of the unit and two full-duplex/half-duplex, autonegotiating 10/100 megabits
per second (Mb/s) Ethernet connections.
You can also order your Instant Internet unit configured with one of the following:
Internal dual-analog V.90 modem
Internal ISDN 128K card (with or without NT1) with a Plain Old Telephone
Service (POTS) connection
Internal 1-Meg modem
Internal T1 connection with an ISDN backup connection
Internal E1 connection with an ISDN backup connection
Internal V.35 or X.21 serial connection with an ISDN backup connection
209375-A
"Related publications" on page
Note: If your unit does not have an internal analog modem or ISDN card,
disregard all references to dial-up account and dial-up configuration
throughout this manual.
21.

Advertisement

Table of Contents
loading

Table of Contents