Figure 2 Passport 8608Gbe Module Leds; Table 2 Passport 8608Gbe Module Leds - Nortel Passport 8600 Series Manual

22 Chapter 1 Passport 8600 modules

Figure 2 Passport 8608GBE Module LEDs

1 = Port TX and RX LEDs
2 = Module Online LED
Table 2

Table 2 Passport 8608GBE Module LEDs

Type
Port
Module
312749-B Rev 00
describes the Passport 8608GBE Module LEDs.
Label Color/State
TX Green/Blinking
Amber/Steady
Off
RX Green/Steady
Green/Blinking
Amber/Steady
Off
Online Green/Steady
Amber/Steady
Off
1 2
9718EB
Meaning
The port is transmitting data.
A fault condition exists on the line or on the
attached remote device.
The port has not detected a fault condition.
The port has a link and is enabled.
The port is receiving data.
The port has either no optical signal or no link
synchronization.
The port has signal but no link.
The module has completed its power-on self-test
and software initialization and is operating
normally.
The module failed its power-on self-test.
The switch power is off, or the power has been
turned on and the module is going through its
power-on self-test and software initialization. A
module in this state is not yet functional.