Kohler KD103V20 Operation And Maintenance Manual page 88

Maintenance
Inspection and maintenance schedules
Component
Exhaust gas turbo‐
SL213
chargers
SL215 LT coolant pump
SL216 HT coolant pump
Coolant thermo‐
SL217
stats
Auxiliary belt drive
SL218
- PTO
SL219 Rubber sleeves
SL220 Charge air cooler
SL221 Oil cooler
Recommended:
SL222
Starter
Battery charging
SL223
alternator
SL224 Cylinder heads
Tab. 17: Service level 2 — ESP — Advanced maintenance - Version: 2018-07
88
Service
Schedule
Type
- 18Y X
- 18Y X
- 18Y X
- 18Y X
- 18Y X
- 18Y X
- 18Y X
- 18Y X
- 18Y X
- 18Y X
- 18Y X
© 2022 by Kohler Co. All rights reserved.
Task description
Check overall condition (compressor blades, leaks,
connections, housings, etc.) every 4000 hours.
Replace the exhaust gas turbocharger at the indi‐
cated service interval.
Replace.
Replace.
Replace.
Replace.
Replace all rubber hose connections on the engine:
e.g., coolant hoses for ECU cooling, hose connec‐
tions for crankcase ventilation.
Clean component according to supplier require‐
ments.
Check visually for leaks. If shown, identify reason.
Replace component if needed.
Inspect the oil cooler.
Inspect the starter (winding insulation, relay, condi‐
tion of the gear teeth, etc.).
Replace.
Replace.
KD103V20 33521030901_2_1 EN_US
2022-09