Table of Contents
Advertisement
Safety
Intended use
– Oiling and greasing stationary engines and machinery
– Inspecting and testing new machinery and mechanical equipment for conformity with stand‐
ards and specifications
– Disassembling machinery and equipment to remove parts and make repairs
– Examining parts for defects such as breakage and excessive wear
– Operating newly repaired machinery and equipment to verify the adequacy of repairs
– Recording repairs and maintenance performed
For SL2 to SL3 maintenance: Agricultural and Industrial Machinery Mechanics
and Repairers – Unit group 7233 / ISCED-97 level 3 to 4
Skill level 3 required.
Agricultural and industrial machinery mechanics and repairers fit, install, examine, service and
repair engines, agricultural and industrial machinery and mechanical equipment, except motor
vehicle, aircraft, and electric motors.
Tasks include:
– Fitting, installing, examining, servicing, and repairing engines, machinery, and mechanical
equipment
– Oiling and greasing stationary engines and machinery
– Inspecting and testing new machinery and mechanical equipment for conformity with stand‐
ards and specifications
– Disassembling machinery and equipment to remove parts and make repairs
– Examining parts for defects such as breakage and excessive wear
– Operating newly repaired machinery and equipment to verify the adequacy of repairs
– Recording repairs and maintenance performed
2.2.3 Unauthorized personnel - servicing
All other persons, including operators, supervisors and trainees, are classified as "unauthorized
personnel" for maintenance work.
They are not allowed to service the engine or access the engine compartment or engine cover.
2.3 Intended use
The Diesel engines produced by Kohler Co. are partly completed machinery according to Machi‐
nery Directive 2006/42/EC Article 2 g (only for European Union).
The Kohler Co. products described in these instructions are intended for use according to the
followings:
– The engines are intended to supply power to equipment (electric generator) and to equip‐
ment auxiliaries as specified by customer.
– The engines are intended for installation in machineries.
– Engines that are used in conjunction with alternators as emergency power generator must
be firmly connected to the ground of the operation site. Appropriate mounting must be used
to reduce the generated vibrations. This mounting must be released by Kohler Co.
– The engines may only be operated in faultless condition.
– The engines may be operated in closed rooms only with adequate ventilation. If additional
fresh air is needed, open the doors and windows.
– The conditions prescribed by the manufacturer of the machinery in which the engine has
been installed are also part of intended use.
– The engines must only be installed by personnel who have been trained and familiarized
herewith and are aware of the dangers.
36
© 2022 by Kohler Co. All rights reserved.
KD103V20 33521030901_2_1 EN_US
2022-09
Advertisement
Table of Contents
