Changing Oil Filters - Sl101 - Kohler KD103V20 Operation And Maintenance Manual

Fig. 56: Example of oil dipstick — oil filler neck
1 Dipstick
Information
Depending on application, some dipsticks have markings ("stopped" / "started").
Check the oil level on the "stopped" side.
u Pull out dipstick 1, wipe with clean cloth and re-insert as far as it goes.
u Pull the oil dipstick again and determine the oil level.
w The oil level must be between the "min." and "max." marks on the dipstick.
If the oil level is too low:
u Remove oil filling cap.
u Replenish oil via the oil filler neck 2.
u Do not replenish Diesel engine with oil over the "max." mark.
u Clean filling cap and close the filler neck.
5.9.4 Changing oil filters — SL101
q Preparatory maintenance activities are fulfilled.
maintenance activities, page 97.)
KD103V20 33521030901_2_1 EN_US
2022-09
2
.
© 2022 by Kohler Co. All rights reserved.
Oil filler neck
(For more information see: 5.5 Preparatory
Maintenance
Lubricating system
113