Changing Oil Filters - Sl101 Bis - Kohler KD62V12 Operation And Maintenance Manual

Operation and Maintenance Manual
5.7.4 Changing oil filters — SL101 bis
q Preparatory maintenance activities are fulfilled.
maintenance activities, page 91)
Fig. 58: Spin-on oil filters
1 Spin-on oil filter
2 Filter head
Spin-on oil filter removal
u Clean sealing area.
u Open spin-on oil filter 1 with filter wrench.
u Remove filter.
u Repeat procedure for all filters.
Spin-on oil filter installation
u Clean sealing area.
u Lubricate filter seal 3 with engine oil.
u Screw spin-on oil filter 1 in filter head 2 until it contacts base.
u Tighten filter by hand by 1/2 turn.
u Operate prelubricating pump to vent the filters.
u In the absence of prelubricating pump, disconnect TDC sensor (flywheel) and start engine until
oil pressure shows up.
u Reconnect TDC sensor.
u Check for leaks and damages.
u Retighten if necessary.
KD62V12 33521030301_6_1 EN_US
2019-02
(For more information see: 5.5 Preparatory
.
3
© 2019 by Kohler Co. All rights reserved.
Seal
Maintenance
Lubricating system
103