Siemens SIMOTION D4 Series Manual page 81

3. Push the plastic lug into the slot-like cutout on the lower side of the control unit.
4. Tilt the double fan/battery module up until the two latches snap into place at the front.
SIMOTION D4x5-2
Manual, 11/2010
Note the two contact strips that are lead through cutouts of the control unit.
This establishes the electrical connection between the double fan/battery module and the
control unit.
Figure 6-2 Installing the double fan/battery module
Supplementary system components
6.2 Fan/battery module
81