Table of Contents
Advertisement
Supplementary system components
6.4 CX32-2 controller extension
Additional references
For information on configuring the DI/DOs as freely addressable I/Os or as measuring inputs,
see the
For information on the configuration and function of the measuring input, output cam, and
cam track technology objects, refer to the
Function Manual.
6.4.2.5
Power supply
Application
This interface is provided exclusively for connection of an external power supply.
Note
When using external power supplies (e.g. SITOP), the ground potential must be connected
with the protective ground terminal (PELV).
Characteristics of the interface
Table 6- 17
Characteristics
Connector type
Connection possibility
Max. current carrying capacity incl. loop-through
Max. cable length
Interface assignments
Table 6- 18
Pin
1
2
3
4
100
SIMOTION D4x5-2
Commissioning and Hardware Installation Manual.
Interface X124
Power supply X124
SIMOTION Output Cams and Measuring Inputs
Type
Combicon
Up to 2.5 mm
20 A
10 m
Signal name
P24
P24
M
M
2
Meaning
24 V power supply
24 V power supply
Ground
Ground
SIMOTION D4x5-2
Manual, 11/2010
Advertisement
Table of Contents
