Siemens SIMOTION D4 Series Manual page 116

Standards and approvals
A .1 General rules
USA
Modifications
Conditions of
Operations
CANADA
Canadian Notice
Avis Canadien
AUSTRALIA
Declaration of conformity
The current Declaration of conformity is available on the Internet at Declaration of conformity
(http://support.automation.siemens.com/WW/view/en/10805446/134200).
Electromagnetic compatibility
Standards for EMC are satisfied, if the EMC Installation Guideline is observed.
CAUTION
There is a risk of injury or of damage to assets. In hazardous areas, personal injury or
damage to assets can occur if plug-in connections are disconnected during operation.
Always de-energize your equipment in hazardous areas before disconnecting plug-in
connections.
116
Changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
D445-2 DP/PN, D455-2 DP/PN and CX32-2 meets the requirements of the
AS/NZS CISPR 22.
SIMOTION D4x5-2
Manual, 11/2010