Siemens SIMOTION D4 Series Manual page 33

Figure 2-3
CAUTION
Always use an insulated screwdriver to turn the rotary switch. Otherwise, static electricity
can destroy the switch.
Mode selector
The following table contains the possible mode selector positions and the associated LED
displays. The mode selector positions are explained in the order in which they are arranged
on the SIMOTION D4x5-2.
Table 2- 1
Selector position
0
1
2
3
Other selector positions are not assigned
SIMOTION D4x5-2
Manual, 11/2010
Selector switches for service and operating modes of the SIMOTION D4x5-2
Mode selector position
Meaning LED
RUN RUN
STOPU SU/PF
STOP STOP
MRES The MRES operating modes are indicated via the STOP LED.
(ON/OFF/flashing, see
Hardware Installation Manual)
Operation (hardware)
2.2 Operator controls
SIMOTION D4x5-2
Commissioning and
33