Siemens SIMOTION D4 Series Manual page 60

Interfaces
3.9 Measuring sockets
Interface assignments
Table 3- 19
The measuring sockets are suited for multiple-spring wire connectors with a diameter of 2 mm.
Note
The measuring sockets support commissioning and diagnostic functions. Connection for
normal operation is not permitted.
Measuring socket position
Figure 3-9
60
Measuring sockets T0, T1, T2
Socket
T0
T1
T2
M
Measuring socket position
Function Technical specifications
Measuring socket 0 Voltage: 0 V to 5 V
Resolution: 8 bits
Measuring socket 1
Load current: Max. 3 mA
Measuring socket 2
Continuous short-circuit-proof
Ground
Reference potential is terminal M
SIMOTION D4x5-2
Manual, 11/2010