Terminal Module Tm41; Simotion D4X5-2; Terminal Module Tm54F - Siemens SIMOTION D4 Series Manual

Additional references
You will find detailed information about the TM31 in the
●
●
6.6

Terminal module TM41

Properties of the TM41
With the TM41 terminal module, the number of available digital inputs/digital outputs and the
number of analog inputs within a drive system can be expanded. In addition, the TTL output
can be used for encoder emulation. The TM41 is connected via DRIVE-CLiQ.
The TB41 contains the following terminals:
Table 6- 29
Type
Digital inputs
Digital inputs/outputs
Analog inputs
TTL encoder output
The 50 mm clearances above and below the component must be observed.
Additional references
You will find detailed information about the TM41 terminal module in the
●
●
6.7

Terminal Module TM54F

Properties of the TM54F
The TM54F terminal module is a terminal expansion module for snapping on to a DIN EN
60715 mounting rail. The TM54F offers safe digital inputs and outputs for control of Safety
Integrated functions of SINAMICS.

SIMOTION D4x5-2

Manual, 11/2010
SINAMICS S120 Control Units and Additional System Components
SIMOTION D4x5-2
Commissioning and Hardware Installation Manual.
Interface overview
CAUTION
SINAMICS S120 Control Units and Additional System Components
SIMOTION D4x5-2
Commissioning and Hardware Installation Manual.
Supplementary system components
6.6 Terminal module TM41
Quantity
4
4
1
1
Manual
Manual
107