Chapter 3 Installation; Section 3.1 Installation Process - GE Healthcare Optima XR200amx Installation Manual

GE H
EALTHCARE
D 5336113-1EN, R
IRECTION

Chapter 3 Installation

Section 3.1 Installation process

1.
2.
3.
4.
5.
6.
7.
See
After installation, configure the system according to the site's requirements, as described in
4 Configuration. Perform necessary calibration, as described in
10
EVISION
Unpack the system (Section 3.2 Unpacking the system on page
Replace the electrical plug, if necessary
page 35).
Perform leakage and ground testing as required
page 37).
Power on and plug in the system
Install the digital detector
XR220amx only).
Install hardware options, such as the DAP meter or barcode reader
hardware options on page
Apply local language labels
Figure 3-1 for the installation workflow.
Chapter 3 Installation
(Section 3.3 Replacing the electrical plug on
(Section 3.5 Ground and leakage testing on
(Section 3.4 Turning on the system on page
(Section 3.6 Installing the digital detector on page
74).
(Section 3.7 Applying local language labels on page
O XR200 /XR220
PTIMA AMX
I
NSTALLATION
34).
35).
50) (Optima
(Section 4.10 Installing
56).
Chapter 5 Calibration.
AMX
M
ANUAL
Chapter
Page 33