Pnf Tabs And Parameters - GE Healthcare Optima XR200amx Installation Manual

GE H
EALTHCARE
D 5336113-1EN, R
IRECTION

4.2.9.2 PNF tabs and parameters

Table 4-10 PNF parameters
Named Services tab
Used to set up filters to allow traffic to common network services (such as telnet or ftp) by
name, without needing to know the port and protocol.
Services/Allowed IPs
Remove Existing Filters
Add New Filter
Allowed Nodes tab
Used to set up filters to allow all traffic from specified nodes. You can specify a particular IP
address, a range of IP addresses, or a masked subnet.
Allowed IPs
Remove Existing Filters
Add New Filter
DICOM tab
Used to add DICOM port numbers (all IP addresses are allowed DICOM access; the DICOM
application may limit access by IP). You can add multiple DICOM ports.
Allowed DICOM Ports
Remove Existing Filters
Add New Filter
Expert tab
Used to set up detailed filters by port, protocol, and node-lock (source).
Used only by advanced IT users.
Name/Port/Protocol
Remove Existing Filters
10
EVISION
Option
Lists current filters by name and IP.
Select the Delete box checkbox next to the filter to delete, then
select DELETE EXISTING FILTERS.
From the Service Name drop-down list, select the service to be
allowed (such as telnet, ssh, ftp).
In the Allowed IPs field, specify a particular IP address, a range
of IP addresses, or a masked subnet.
Select ADD FILTER to apply your changes.
Lists current filters by IP.
Select the Delete box checkbox next to the filter to delete, then
select DELETE EXISTING FILTERS.
In the Allowed IPs field, specify a particular IP address, a range
of IP addresses, or a masked subnet.
Select ADD FILTER to apply your changes.
Lists current DICOM ports by number.
Select the Delete box checkbox next to the port to delete, then
select DELETE EXISTING FILTERS.
In the Allowed Port field, specify a particular DICOM port.
Select ADD FILTER to apply your changes.
Lists current filters by name, port number, protocol, and IP.
Select the Delete box checkbox next to the filter to delete, then
select DELETE EXISTING FILTERS.
Chapter 4 Configuration
O XR200
PTIMA
I
NSTALLATION
Description
/XR220
AMX AMX
M
ANUAL
Page 65