Polaris ACE 900 2017 Service Manual page 297

10. Install new brake caliper mounting bolts and torque to
specification.
TORQUE
Front Caliper Mounting Bolts:
30 ft-lbs (54 Nm)
CAUTION
New bolts have a pre-applied locking agent which is
destroyed upon removal. Always use new brake caliper
mounting bolts upon assembly.
11. Install the steering tie rod end
bearing carrier.
NOTE
Refer to the photo below to ensure proper placement of
the tie rod end.
12. Torque the tie rod end fastener
i
install a new cotter pin .
TORQUE
Tie Rod End Fastener:
42 ft-lbs (57 Nm)
9929422 R02 - 2017-2019 ACE 900 Service Manual
© Copyright Polaris Industries Inc.
13. Torque wheel hub nut
y
onto the front
14. Install wheel and four wheel nuts. Torque wheel nuts
15. Rotate wheel and check for smooth operation.
u
to specification and
o
to specification and install a
a
new cotter pin . Tighten nut slightly if necessary to
align cotter pin holes. Bend both ends of cotter pin
around end of spindle in different directions.
TORQUE
Wheel Hub Castle Nut:
110 ft-lbs (149Nm)
to specification.
TORQUE
Aluminum Wheels:
30 ft-lbs + 90° (41 Nm)
FINAL DRIVE
7
7.7