FINAL DRIVE
REAR BEARING CARRIER ASSEMBLY
1. Support bottom of bearing carrier housing.
q
2. Start bearing
in housing.
3. Press bearing into place until outer race bottoms on
housing.
CAUTION
Use an arbor press only on the outer race to avoid
bearing damage.
q
4. Install snap ring
into groove.
7.10
5. Inspect the bearing carrier pivot shafts and bushings.
Replace these parts as required. Lubricate pivot
shafts with Premium All Season Grease during
installation.
9929422 R02 - 2017-2019 ACE 900 Service Manual
© Copyright Polaris Industries Inc.