Polaris ACE 900 2017 Service Manual page 276

TRANSMISSION
12. Lift up on the shift shaft rail
assembly rearward to allow the shift fork pins
removed from the shift drum
drum from the transmission housing.
13. Remove the shift shaft rail
transmission housing as an assembly.
14. Remove the rear output shaft assembly
underneath the gear or by tapping the shaft from the
opposite side.
6.20
j
and move the rail
k
to be
l
. Remove the shift
j
and shift forks from the
1 (
by lifting
15. Remove the input shaft
and idler gear shaft assembly
transmission housing by pulling both assemblies
straight up.
16. Place the gear cluster assembly on a clean surface
for inspection. If disassembly is required, refer to
"Gear Cluster Disassembly".
17. Using a 5 mm Allen wrench, remove the screws that
secure the pinion shaft assembly
shaft assembly straight up to remove it from the
housing. Note the longer screw
snorkel tube.
18. Remove all seals from the gearcase halves and clean
the cases in preparation for assembly.
Gear Cluster Disassembly
9929422 R02 - 2017-2019 ACE 900 Service Manual
2)
, gear cluster assembly
2@
from the
2#
. Lift the pinion
2 $
that locks the
© Copyright Polaris Industries Inc.
2!