B Checklist C Procedure; Replace The Hydraulic Tank Breather Cap - Models With Optional Hydraulic Oil; Perform Axle Maintenance - Ansi Models; Perform Hitch Maintenance - Ce Models - Genie TMZ-50/30 Service Manual

June 2005
800-610-4101
ActionRental.com
REV B
C-1
Replace the
Hydraulic Tank Breather Cap -
Models with Optional Hydraulic Oil
The hydraulic tank is a vented-type tank. The
breather cap has an internal air filter that can
become clogged or, over time, can deteriorate. If
the breather cap is faulty or improperly installed,
impurities can enter the hydraulic system which
may cause component damage. Extremely dirty
conditions may require that the cap be inspected
more often.
1 Remove and discard the hydraulic tank breather
cap.
2 Install a new cap onto the tank.
Part No. 65162
Section 3 • Scheduled Maintenance Procedures
Checklist C Procedures
C-2
Perform Axle Maintenance -
ANSI Models
Required maintenance procedures and additional
axle information is available in the Dexter Axle
Operation Maintenance Service Manual
(Dexter part number LIT-001-00).
Dexter Axle Operation Maintenance Service Manual
Genie part number
C-3
Perform Hitch Maintenance -
CE Models
Proper hitch maintenance, following the hitch
manufacturer's maintenance schedule, is essential
to good hitch performance and service life. Failure
to perform the maintenance procedures can lead to
poor hitch performance and component damage.
Required maintenance procedures and additional
axle information is available in the Knott Axle
Service Manual (Knott part number P005).
Knott Axle Service Manual
Genie part number
TMZ-50/30
Axle specifications require that this
procedure be performed every 6
months or 6000 miles, whichever
comes first.
Hitch specifications require that
this procedure be performed semi-
annually.
84376
84443
3 - 25