A-3.5 Safety Devices - Genie GTH-2306 Operator's Handbook Manual

■ A-3.5
SAFETY DEVICES
• Overload warning device (ARB). It is a load limiter
fitted to the kingpin of the front axle. The cab display
with 5 LEDs (3 green, 1 yellow and 1 red) enables
the operator to check the stability variation of the
machine.
• Emergency stop pushbutton: when pressed down,
it stops the engine and blocks the movements of
the machine.
Before starting work again, find and rectify the
causes which compelled to an emergency stop,
then reset the button to neutral position pressing it
down while turning clockwise.
Handler with telescopic boom GTH-2306
GENERAL INFORMATION
A-13
Page
Document 57.0002.2200 - 12/2002
• Presence micro-switch on the parking brake which
prevents any machine starting when the parking
brake is not engaged.
• Presence micro-switch in the driving seat (inside
the seat cushion) which prevents any machine
starting if the operator is not correctly seated in the
driving seat.
• Safety pushbutton on joystick (dead man button).
This button must be pressed and held down while
executing a function with the control lever. If the
button is released, the movement in progress will
be blocked.