C Checklist C Procedure; Replace The Hydraulic Tank Breather Cap - Models With Optional Hydraulic Oil; Perform Axle Maintenance - Ansi Models - Genie TMZ-34/19 Service Manual

Section 3 • Scheduled Maintenance Procedures
800-610-4101
ActionRental.com
Checklist C Procedures
C-1
Replace the
Hydraulic Tank Breather Cap -
Models with Optional Hydraulic Oil
The hydraulic tank is a vented-type tank. The
breather cap has an internal air filter that can
become clogged or, over time, can deteriorate. If
the breather cap is faulty or improperly installed,
impurities can enter the hydraulic system which
may cause component damage. Extremely dirty
conditions may require that the cap be inspected
more often.
1 Remove and discard the hydraulic tank breather
cap.
2 Install a new cap onto the tank.
3 - 22
C-2
Perform Axle Maintenance -
ANSI Models
Axle specifications require that this
procedure be performed every 6
months or 6000 miles, whichever
comes first.
Required maintenance procedures and additional
axle information is available in the Dexter Axle
Operation Maintenance Service Manual
(Dexter part number LIT-001-00).
Dexter Axle Operation Maintenance Service Manual
Genie part number
TMZ-34/19
June 2005
REV C
84376
Part No. 52075