BOMBARDIER OUTLANDER 330 H.O. 2x4 Operator's Manual page 73

Table of Contents

Advertisement

WARNING
When engine is running, always
engage the PARK position on the
transmission lever before open-
ing cover. Never leave any heavy
or loose breakable objects in the
storage basket. Always latch cov-
er before riding. If storage cover
is removed to provide greater car-
rying area, ensure that cargo is
secured and will not "fly out"
when riding at speed on rough
terrain. Slow down.
16) Seat Latch
Located underneath the rear end of
seat. It allows the removal of seat to
give access to engine compartment.
V07L04Y
1. Seat latch
Seat Removal
Push latch forward while gently lifting
rear of seat. Pull seat rearward. Contin-
ue lifting movement until you can re-
lease the front retaining device then
completely remove seat.
1
Seat Installation
Insert front tabs of seat into frame
hook. When seat rests in its position,
firmly push seat down to latch.
V07L05Y
1. Insert these tabs in hooks
2. Hooks
WARNING
Periodically verify the seat lock pin
and tighten if needed. Make sure
seat is securely latched before
riding.
17) Front/Rear Cargo Rack
Located on top of chassis at front and
rear. Convenient rack to carry gear.
WARNING
Ensure to properly secure materi-
al to rack. Do not overload. En-
sure load does not interfere with
visibility and/or steering. Do not
carry passenger(s).
Refer to SPECIFICATIONS for carrying
loads and cargo weight distribution
recommendations.
1
2
71

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents