BOMBARDIER OUTLANDER 330 H.O. 2x4 Operator's Manual page 68

3
V07G01Y
1. Rectifier harness
2. Change wire connectors
3. Fuse holders
Plug connectors to change units from
miles to kilometers. Unplug to return
to miles reading.
Fix the change wires to the harness
with new locking ties.
Display Selector Button
The odometer always appears when
turning the ignition switch ON (either
ON position). To change the display to
the trip meter, depress the display se-
lector button.
V07I0BY
66
1 3
2
Depressing display selector button
again will change display for the hour-
meter. Push display selector button
again to return to odometer.
Odometer
Odometer records the total distance
travelled either in miles or kilometers.
Trip Meter
The trip meter records distance travel-
led since it has been reset. Distance
travelled is displayed either in miles or
kilometers.
It can be used to establish a fuel tank
range or distance between 2 way
points for instance.
Push and HOLD display selection but-
ton for 2 seconds to reset the trip
meter.
Hourmeter
The hourmeter records engine running
time in hours and minutes.
Indicator Lamps
V07I0KY
4-Wheel Drive (AMBER)
4 x 4 Models
When this indicator light is ON, it
indicates the 4WD system is ac-
tivated.