BOMBARDIER OUTLANDER 330 H.O. 2x4 Operator's Manual page 65

6) Multi-Function Switch
The multi-function switch is located on
the left side of handlebar.
V07I02Y
1. Multi-function switch
The controls located on this multi-
function switch are:
Headlamp Switch
Located on the top of multi-function
switch. Place headlamp switch to LO
for the low beam and taillight. Place
headlamp switch to HI for the high
beam and taillight.
1
V07I03Y
1. Headlamp switch
2. Low beam position
3. High beam position
1
3 2
NOTE: Place ignition switch to ON
"without light" position to close the
headlamp.
V07I11Y
ON POSITION "WITHOUT LIGHT"
Engine Stop Switch
Located at the middle of multi-function
switch. The engine will turn over but
will not start if the engine stop switch
is turned to OFF position.
This switch can be used to stop engine
and as an emergency control.
NOTE: While engine can be stopped
by turning ignition key OFF, we recom-
mend the engine be stopped by the
engine stop switch.
V07I05Y
1. Engine stop switch
1
63