BOMBARDIER OUTLANDER 330 H.O. 2x4 Operator's Manual page 105

A-arms
Check A-arms for cracks, bending or
other damages. See an authorized
Bombardier ATV dealer as necessary.
Adjustment
Rear Shocks
WARNING
Left and right adjustment cams
must always be set to the same
position. Never adjust one adjust-
ing cam only. Uneven adjustment
can cause poor handling and loss
of stability, which could lead to an
accident.
Preload Adjustment
Adjust spring preload by turning ad-
justing cam accordingly, with the ad-
justing wrench in vehicle tool box.
Turn the adjusting cams clockwise for a
firmer ride and rough road condition or
when carrying cargo or pulling a trailer.
Turn the adjusting cams counterclock-
wise for a light load and a smooth road
condition.
2
V07J01Y
1. Adjusting cams
2. Smooth adjustment
3. Hard adjustment
1 3
Brake
Front and Rear Brakes
The front and rear brakes are hydraulic
disc types. These brakes are self-
adjusting and require no adjustment.
The brake lever and the brake pedal re-
quire no adjustment.
Check the following to keep the
brakes in a good operating condition:
– brake system for fluid leaks
– brake for spongy feel
– brake discs for excessive wear and
surface condition
– brake pads for wear, damage or
looseness.
SERVICE LIMIT
Brake pads
thickness
Front discs
thickness
Rear disc
thickness
Maximum discs
warpage
Brake Fluid Replacement
WARNING
The brake fluid replacement or
any brake system repairs should
be performed by an authorized
Bombardier ATV dealer.
Body/Frame
Engine Area
Check engine area for any damage and
leaks. Ensure all hose clamps are prop-
erly secured and no hose is cracked,
kinked or otherwise damaged.
1 mm (.040 in)
3.5 mm (.138 in)
4.3 mm (.170 in)
0.3 mm (.010 in)
103