2.6
Energize the HPOD SSPA
WARNING! Never turn the unit ON without proper waveguide termination on
the 'J2 RF OUTPUT' port. Individuals can be exposed to dangerously high
electromagnetic levels.
The HPOD SSPA does not contain a 'Power On/Off' switch. Power ON the SSPA by connecting
the 'J3 | AC IN' Power connector to the appropriate prime power source. The Mute or Transmit
status of the SSPA will automatically come up in the last stored state (factory default = Transmit
on, not muted).
External Connectors and Pinouts
HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier
Figure 2-4. HPOD Unit
2–9
Revision 9
MN/HPOD.IOM