Table of Contents
Advertisement
5)
Press the <ENTER> button.
f The [KEY] screen is displayed.
6)
Press asqw to select the text, and press the <ENTER> button to enter the text.
f The character string that can be registered as the connection key is as follows.
g 8 to 15 single-byte alphanumeric characters
7)
After entering the connection key, press asqw to select [OK], and press the <ENTER> button.
8)
Press as to select [STORE], and press the <ENTER> button.
f The confirmation screen is displayed.
9)
Press qw to select [OK], and press the <ENTER> button.
Note
f The factory default setting of the connection key is "spjcxxxx". xxxx is the four digit number assigned for each product.
[PROJECTOR NAME]
Change the projector name. Enter the host name if it is required to use a DHCP server.
1)
Press as to select [PROJECTOR NAME].
2)
Press the <ENTER> button.
f The [PROJECTOR NAME CHANGE] screen is displayed.
3)
Press asqw to select the text, and press the <ENTER> button to enter the text.
f Up to 12 characters can be entered.
4)
After entering the projector name, press asqw to select [OK] and press the <ENTER> button.
f To cancel, select [CANCEL].
Note
f The factory default setting of the projector name is "NAMExxxx". xxxx is the four digit number assigned for each product.
[NETWORK STATUS]
Display the network information of the projector.
1)
Press as to select [NETWORK STATUS].
2)
Press the <ENTER> button.
f The [NETWORK STATUS] screen is displayed.
3)
Press qw to switch the the display screen.
f The page will change each time you press the button.
[WIRED LAN (IPv4)] (page 1/5), [WIRED LAN (IPv6)] (page 2/5 and 3/5), [WIRELESS LAN] (page 4/5 and
5/5)
[WIRED LAN (IPv4)]
[WIRED LAN (IPv6)]
168 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
[DHCP]
Displays the [DHCP] setting.
[IP ADDRESS]
Displays the [IP ADDRESS].
[SUBNET MASK]
Displays the [SUBNET MASK].
[DEFAULT GATEWAY]
Displays the [DEFAULT GATEWAY].
[DNS1]
Displays the address of the preferred DNS server.
[DNS2]
Displays the address of the alternate DNS server.
[MAC ADDRESS]
Displays the [MAC ADDRESS] of wired LAN.
[AUTO CONFIGURATION]
Displays the [AUTO CONFIGURATION] setting.
[LINK LOCAL ADDRESS]
Displays [LINK LOCAL ADDRESS] and [PREFIX LENGTH].
[STATEFUL ADDRESS]
Displays [STATEFUL ADDRESS] and [PREFIX LENGTH].
[STATELESS ADDRESS]
Displays [STATELESS ADDRESS] and [PREFIX LENGTH].
[TEMPORARY ADDRESS]
Displays [TEMPORARY ADDRESS] and [PREFIX LENGTH].
[IP ADDRESS]
Displays [IP ADDRESS] and [PREFIX LENGTH].
[DEFAULT GATEWAY]
Displays the [DEFAULT GATEWAY].
[DNS1]
Displays the address of the preferred DNS server.
[DNS2]
Displays the address of the alternate DNS server
[MAC ADDRESS]
Displays the [MAC ADDRESS] of wired LAN.
Advertisement
Table of Contents
