Table of Contents
Advertisement
NETWORK menu (continued)
5
Press ▲ ▼◄► to select [Set], and press <SELECT> button.
Save the current network settings.
When configuration is completed, you need to select [Set] and press the <SELECT> button. At this point,
select [Back] to go back to the previous screen (2/3), or select [Cancel] to cancel the configuration change.
Projector name
You can change the projector name to be displayed on the network.
1
Press ▲ ▼ to select [Projector name], and press <SELECT> button.
2
Select characters with the ▲ ▼◄►
buttons and press the <SELECT>
button to enter the projector name.
3
Select [Set] with the ▲ ▼◄► buttons
and press the <SELECT> button.
Select [Cancel] to undo the changes and then
press the <SELECT> button.
15
Advertisement
Table of Contents
