Table of Contents
Advertisement
Chapter 5 Operations — Using the information monitor function
[INFO MONITOR]
Set the information monitor.
r Setting the display during normal status
Display/hide the information monitor during no operation.
1)
Press as to select [SETUP].
2)
Press the <ENTER> button.
f The sub-menu item is displayed.
3)
Press as to select [INFO MONITOR].
4)
Press the <ENTER> button.
f The detailed setting item is displayed.
5)
Press as to select [DEFAULT].
f The current setting is displayed.
6)
Press the <ENTER> button.
f Setting can be changed.
7)
Press qw to switch the setting item.
f The items will switch each time you press the button.
[USER VIEW]
[OFF]
Note
f This setting item is common with the following menu item in the on-screen menu.
g The [PROJECTOR SETUP] menu → [INFO MONITOR SETTING] → [DEFAULT]
f Even if [DEFAULT] is set to [OFF], the content of an error or a warning is automatically displayed when it occurs.
r Setting the information to display
Set the items to display during the USER VIEW mode.
1)
Press as to select [SETUP].
2)
Press the <ENTER> button.
f The sub-menu item is displayed.
3)
Press as to select [INFO MONITOR].
4)
Press the <ENTER> button.
f The detailed setting item is displayed.
5)
Press as to select an item to change setting.
f The current setting is displayed.
Item
[INPUT]
[SIGNAL NAME]
[AC VOLTAGE]
[INTAKE AIR TEMP.]
[EXHAUST AIR TEMP.]
[SHUTTER]
[FREEZE]
[OSD]
[IP ADDRESS(WIRED)]
216 - ENGLISH
Sets the screen mode during no operation to the USER VIEW mode.
Displays the items set in the menu operation mode → [SETUP] menu → [INFO MONITOR]. For
details, refer to "Setting the information to display" (x page 216).
Sets the screen mode during no operation to the hide mode.
Does not display the information.
Currently selected input
Input signal name
Input supply voltage
Intake air temperature of the projector
Exhaust air temperature of the projector
Status of the shutter ([CLOSE]: Shutter function enabled; [OPEN]: Shutter
function disabled)
Status of the freeze function ([ON]: Paused; [OFF]: Cleared)
Status of the on-screen display function ([ON]: Display; [OFF]: Hide)
IP address of the wired LAN
Details
Factory default
[ON]
[ON]
[ON]
[ON]
[OFF]
[OFF]
[OFF]
[OFF]
[OFF]
Advertisement
Table of Contents
