Panasonic PT-MZ20K Operating Instructions Manual page 219

Hide thumbs Also See for PT-MZ20K:
Table of Contents

Advertisement

Chapter 5 Operations — Using the information monitor function
7)
Press as to select [IPv4].
8)
Press the <ENTER> button.
f The detailed setting item is displayed.
9)
Press as to select [DHCP].
f The current setting is displayed.
10) Press the <ENTER> button.
f Setting can be changed.
11) Press qw to switch the setting item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f This setting item is common with the following menu item in the on-screen menu.
g The [NETWORK] menu → [WIRED LAN] → [IPv4 SETTINGS] → [DHCP]
r Setting the wired LAN IPv4 address
Set the IP address, the subnet mask, and the default gateway if a DHCP is not used.
1)
Press as to select [SETUP].
2)
Press the <ENTER> button.
f The sub-menu item is displayed.
3)
Press as to select [NETWORK].
4)
Press the <ENTER> button.
f The network selection item is displayed.
5)
Press as to select [WIRED LAN].
6)
Press the <ENTER> button.
f The IP setting item is displayed.
7)
Press as to select [IPv4].
8)
Press the <ENTER> button.
f The detailed setting item is displayed.
9)
Press as to select [IP ADDRESS], [SUBNET MASK], or [DEFAULT GATEWAY].
f The current setting is displayed.
10) Press the <ENTER> button.
f Setting can be changed.
11) Press asqw to enter the address.
f Press qw to select the number to change, and press as to change the number.
12) Press the <ENTER> button.
f The setting is reflected.
Note
f This setting item is common with the following menu item in the on-screen menu.
g The [NETWORK] menu → [WIRED LAN] → [IPv4 SETTINGS] → [IP ADDRESS] / [SUBNET MASK] / [DEFAULT GATEWAY]
f The number can be entered with the number (<0> - <9>) buttons on the remote control when the projector is in the standby status.
Select this item when using the DHCP server that exists in the network to which the projector is to be
connected.
IPv4 address is automatically acquired.
Select this item when setting the IPv4 address manually.
Set [IP ADDRESS], [SUBNET MASK], and [DEFAULT GATEWAY].
ENGLISH - 219

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-mz17kPt-mz14kPt-mz11k

Table of Contents