Table of Contents
Advertisement
Chapter 3 Basic Operations — Switching on/off the projector
[PASSWORD POLICY]
Display a policy about the password of the administrator account.
1)
Press as to select [PASSWORD POLICY], and press the <ENTER> button.
f The [PASSWORD POLICY] screen is displayed.
f Pressing the <MENU> button to return to the [ADMINISTRATOR ACCOUNT] screen.
Setting the administrator account
Set the user name and password of the account with administrator rights.
1)
Press as to select [USER NAME], and press the <ENTER> button.
f The [USER NAME] screen is displayed.
f The factory default setting of the user name for the administrator account is set to is "dispadmin".
2)
Press asqw to select the text, and press the <ENTER> button to enter the text.
f Up to 16 characters can be entered.
3)
After the user name is entered, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
4)
Press as to select [PASSWORD], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
5)
Press asqw to select the text, and press the <ENTER> button to enter the text.
f Up to 16 characters can be entered.
f The password cannot be blank.
6)
After the password is entered, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
7)
Press as to select [PASSWORD CONFIRM], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
8)
Enter the password entered in Step 5).
9)
After the password is entered, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
10) Press as to select [STORE], and press the <ENTER> button.
f The confirmation screen is displayed.
11) Press qw to select [OK], and press the <ENTER> button.
Note
f For limitation of the character string that can be set as a password, refer to "[PASSWORD POLICY]" (x page 64).
f Pressing the <MENU> button while the [ADMINISTRATOR ACCOUNT] screen is displayed enables to advance to the next operation
without setting the password of the administrator account but network function of the projector will not be able to be used. When using the
web control function or the communication control via LAN (including operation by application software), set a password.
f When pressing the <MENU> button while the [ADMINISTRATOR ACCOUNT] screen is displayed, the [ADMINISTRATOR ACCOUNT]
screen will not be displayed from the next time the projector is switched on. To use the network function, set a password in the [NETWORK]
menu → [ADMINISTRATOR ACCOUNT].
64 - ENGLISH
PASSWORD POLICY
Reusing passwords is not recommended.
Password cannot be blank.
A password consisting of at least eight
half-width characters and contaning
characters of at least three of the
following four types is recommended.
Uppercase letters
Lowercase letters
Digits
Symbols (~!@#$%^&*()_+\|}{][<>.,/?`)
RETURN
MENU
Advertisement
Table of Contents
