Using Art-Net Function - Panasonic PT-MZ20K Operating Instructions Manual

Class Command
Input signal resolution
2 IRES ?
query
Recommended
2 RRES ?
resolution query
2 FILT ? Filter runtime inquiry
Filter replacement
2 RFIL ?
model number inquiry
FREZ Freeze control
2
FREZ ? Freeze status query
Cooling notification
2 POWR
Warmup notification
2 ERST Error notification
2 LKUP Link up notification
Input switch
2 INPT
completion notification
2 SRCH Projector search
PJLink security authentication
A PJLink password for security authentication procedure is required for communication of the PJLink command.
The PJLink password can be set in the [NETWORK] menu → [PJLink] → [PJLink PASSWORD] (x page 173), or
in "[Set up password] page (when accessed by administrator account)" (x page 210) of the web control screen.
When communicating the PJLink command without authentication procedure, set the PJLink password as blank.
The factory default setting of the PJLink password is blank.
f For specifications related to PJLink, visit the website of Japan Business Machine and Information System
Industries Association.
URL http://pjlink.jbmia.or.jp/english/

Using Art-Net function

Since the network function of the projector supports the Art-Net function, you can control the projector settings
with the DMX controller and application software using the Art-Net protocol.
Note
f To use the Art-Net function with the projector, it is necessary to set the password of the administrator account. (x page 169)
f The Art-Net function cannot be used using the "IPv6" protocol. Set the [NETWORK] menu → [WIRED LAN] → [IP VERSION] to either [IPv4]
or [IPv4 & IPv6] and assign the IP address for "IPv4".
Channel definition
The following table lists the channel definitions used for controlling the projector with the Art-Net function.
Channel settings can be switched using the [NETWORK] menu → [Art-Net] → [Art-Net CHANNEL SETTING]
(x page 175).
The control details assigned to each channel are listed in the following table.
f Channel assignment for [USER] is in factory default setting. Assignment can be changed.
Channel
CHANNEL1
CHANNEL2
CHANNEL3
CHANNEL4
CHANNEL5
CHANNEL6
CHANNEL7
CHANNEL8
Chapter 7 Appendix — Technical information
Parameter/response
Control details
string
AAAAxBBBB
1920 x 1200
xxxxx
ET-RFM100
0
1
0
1
xxxxxx
xx:xx:xx:xx:xx:xx
31
32
33
34
ACKN=xx:xx:xx:xx:xx:xx
[2]
LIGHT OUTPUT
INPUT SELECT
LENS POSITION
LENS H SHIFT
LENS V SHIFT
LENS FOCUS
LENS ZOOM
POWER
Remark
AAAA: Horizontal resolution
BBBB: Vertical resolution
Returns display resolution.
Returns the runtime of the filter.
Returns the filter replacement model number.
Freeze clear
Freeze (stop)
Notifies when the power is turned off.
Notifies when the power is turned on.
Notifies when an error occurs.
Notifies the MAC address when the PJLink communication
becomes possible.
HDMI1
HDMI2
DIGITAL LINK
SDI
The projector connected to the same network that can
communicate with PJLink will respond with its MAC address.
Control details
[USER]
LIGHT OUTPUT
INPUT SELECT
LENS POSITION
LENS H SHIFT
LENS V SHIFT
LENS FOCUS
LENS ZOOM
POWER
[1]
SHUTTER
INPUT SELECT
LENS FUNCTION SELECT
LENS CONTROL
POWER
LIGHT OUTPUT
ENABLE/DISABLE
FADE-IN
ENGLISH - 251