Table of Contents
Advertisement
3)
Press as to select [INPUT SELECT].
4)
Press qw to switch the item.
[PROJECTOR]
[DIGITAL LINK]
5)
Press as to select [(IN) BAUDRATE].
6)
Press qw to switch the item.
f The items will switch each time you press the button.
[9600]
[19200]
[38400]
7)
Press as to select [(IN) PARITY].
8)
Press qw to switch the item.
f The items will switch each time you press the button.
[NONE]
[EVEN]
[ODD]
Setting the communication condition of the <SERIAL/MULTI SYNC OUT> terminal
1)
Press as to select [RS-232C].
2)
Press the <ENTER> button.
f The [RS-232C] screen is displayed.
3)
Press as to select [(OUT) BAUDRATE].
4)
Press qw to switch the item.
[9600]
[19200]
[38400]
5)
Press as to select [(OUT) PARITY].
6)
Press qw to switch the item.
f The items will switch each time you press the button.
[NONE]
[EVEN]
[ODD]
Setting the response
1)
Press as to select [RS-232C].
2)
Press the <ENTER> button.
f The [RS-232C] screen is displayed.
3)
Press as to select [RESPONSE(ID ALL)].
4)
Press qw to switch the item.
[ON]
[OFF]
144 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Performs the RS-232C communication with the <SERIAL/MULTI SYNC IN> terminal of the projector.
Performs the RS-232C communication via the optional DIGITAL LINK output supported device (Model
No.: ET-YFB100G, ET-YFB200G) and the <DIGITAL LINK> terminal.
Select the proper speed.
Select the parity condition.
Select the proper speed.
Select the parity condition.
Returns the response when an ID is designated as ALL.
Does not return the response when an ID is designated as ALL.
Advertisement
Table of Contents
