Table of Contents
Advertisement
Chapter 5 Operations — Using the information monitor function
4)
Press the <ENTER> button.
f The detailed item is displayed.
f The network selection item is displayed when [NETWORK] is selected in Step 3). Proceed to Step 6).
5)
Press as to switch the item.
f The display items will switch each time you press the button.
Sub-menu item
[PROJECTOR]
[INFO MONITOR]
[VERSION]
6)
Press as to switch the item.
f The display items will switch each time you press the button.
[PJ NAME]
[WIRED LAN]
[WIRELESS LAN]
222 - ENGLISH
Detailed item
[PROJECTOR ID]
[PROJECTOR TYPE]
[SERIAL NUMBER]
[PROJECTOR RUNTIME]
[LIGHT RUNTIME]
[INTAKE AIR TEMP.]
[EXHAUST AIR TEMP.]
[LIGHT1 TEMP.]
[LIGHT2 TEMP.]
[SELF TEST]
[INPUT]
[SIGNAL NAME]
[ON SCREEN DISPLAY]
[SHUTTER]
[FREEZE]
[REMOTE1 STATUS]
[AC VOLTAGE]
[OPERATING MODE]
[LIGHT OUTPUT]
[DEFAULT]
[INPUT]
[SIGNAL NAME]
[AC VOLTAGE]
[INTAKE AIR TEMP.]
[EXHAUST AIR TEMP.]
[SHUTTER]
[FREEZE]
[OSD]
[IP ADDRESS(WIRED)]
[DIRECTION]
[BRIGHTNESS]
[FIRMWARE VERSION]
Select this item when [PROJECTOR NAME] is to be displayed.
Select this item when the information of the wired LAN is to be displayed.
Select this item when the information of the wireless LAN is to be displayed.
Details
Displays the ID number set to the projector.
Displays the type of the projector.
Displays the serial number of the projector.
Displays the runtime of the projector.
Displays the runtime of the light source 1 and the light source 2.
Displays the intake air temperature status.
Displays the exhaust air temperature status.
Displays the status of the light source 1 temperature of the
projector.
Displays the status of the light source 2 temperature of the
projector.
Displays the self-diagnosis information.
Displays the detailed information when the <ENTER> button is
pressed while error/warning has occurred.
Displays the currently selected input.
Displays the input signal name.
Displays the status of on-screen display function. ([ON]: Display;
[OFF]: Hide)
Displays the status of the shutter. ([CLOSE]: Shutter function
enabled; [OPEN]: Shutter function disabled)
Displays the status of the freeze function. ([ON]: Paused;
[OFF]: Cleared)
Displays the control status of the REMOTE1.
Displays the input supply voltage.
Displays the setting value of the [PROJECTOR SETUP] menu →
[OPERATION SETTING] → [OPERATING MODE].
Displays the setting value of the [PROJECTOR SETUP] menu →
[LIGHT OUTPUT].
Displays the display setting of the information monitor during normal
status. ([USER VIEW]: Display; [OFF]: Hide)
Displays the display status of each item during the USER VIEW
mode. ([ON]: Display; [OFF]: Hide)
Displays the direction of the text to display in the information
monitor. ([AUTO]: Automatic detection; [NORMAL]: Floor mount;
[FLIPPED]: Inverted upside down)
Displays the setting value of the [PROJECTOR SETUP] menu →
[INFO MONITOR SETTING] → [BRIGHTNESS].
Displays the firmware version of the projector.
Advertisement
Table of Contents
