Table of Contents
Advertisement
r COLOR, TINT
Performance
No operation
Factory default setting
-31
...
+31
No operation
r RASTER PATTERN
Performance
No operation
OFF
WHITE
YELLOW
CYAN
GREEN
MAGENTA
RED
BLUE
BLACK
USER LOGO
No operation
r ENABLE/DISABLE
Operation for all channels is not accepted when set to "Disable".
Performance
Disable
Enable
Note
f If the projector is operated using the remote control or the control panel, or by the control command while controlling the projector using the
Art-Net function, the setting of the DMX controller or computer application may be different from the projector status. To reflect the controls
of all channels to the projector, set "ENABLE/DISABLE" of channel 11 to "Disable" and then back to "Enable".
f To create and register the USER LOGO image, use "Logo Transfer Software". The software can be downloaded from the following website.
https://panasonic.net/cns/projector/
Chapter 7 Appendix — Technical information
Parameter
0-31
32-63
64
...
191
192-255
Parameter
0-15
16-31
32-47
48-63
64-79
80-95
96-111
112-127
128-143
144-159
160-175
176-255
Parameter
0-127
128-255
Default value
0
Default value
0
Default value
0
ENGLISH - 255
Advertisement
Table of Contents
