Connecting Example: Computers - Panasonic PT-MZ20K Operating Instructions Manual

Hide thumbs Also See for PT-MZ20K:
Table of Contents

Advertisement

For <SDI IN> terminal
Digital VCR for commercial use
Note
f Setting of the [DISPLAY OPTION] menu → [SDI IN] may be necessary depending on the connected external device.
f Use a connection cable 5C-FB or higher (such as 5C-FB or 7C-FB), or Belden 1694A or higher to properly transmit the image. Use a
connection cable with length of 100 m (328'1") or shorter.
f An error in signal detection may occur when an unsteady signal is connected. In such case, set the [DISPLAY OPTION] menu → [SDI IN] to
the content corresponding to the input signal.

Connecting example: Computers

Computer
Attention
f When connecting the projector to a computer or an external device, use the power cord supplied with each device and commercially
available shielded cables.
Note
f Switching of the setting in the [DISPLAY OPTION] menu → [HDMI IN] → [HDMI1] / [HDMI2] → [EDID SELECT] may be required depending
on the connected external device when HDMI signal is input.
f For the HDMI cable, use an HDMI High Speed cable that conforms to the HDMI standards. However, when the following 4K image signal
exceeding the supported transmission speed of the HDMI High Speed cable is to be input, use the HDMI cable supporting the high speed
transmission of 18 Gbps such as the one with Premium HDMI cable authentication.
g An image signal with high specification color depth and gradation such as 3840 x 2160/60p 4:2:2/36-bit or 3840 x 2160/60p 4:4:4/24-bit
Images may be disrupted or may not be projected when an image signal exceeding the supported transmission speed of the HDMI cable is
input.
f The <HDMI IN 1> / <HDMI IN 2> terminals of the projector can be connected to an external device equipped with a DVI-D terminal using an
HDMI/DVI conversion cable. However, this may not function properly for some external devices, and image may not be projected.
f If you operate the projector using the computer with the resume feature (last memory), you may have to reset the resume feature to operate
the projector.
Chapter 2 Getting Started — Connecting
HD-SDI signal or 3G-SDI signal
Control computer
Control computer
ENGLISH - 49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-mz17kPt-mz14kPt-mz11k

Table of Contents