EN
Only use the hose-sets supplied with the appliance for the water supply
►
connection (do not reuse old hose-sets).
Water pressure must be between 0.03 MPa and 1 MPa.
►
Make sure carpets or rugs do not obstruct the base or any of the
►
ventilation openings.
After installation, the appliance must be positioned so that the plug is
►
accessible.
The maximum load capacity of dry clothes depends on the model used
►
(see control panel).
To consult the product technical specification please refer to the
►
manufacturer website.
Electrical connections and safety instructions
The technical details (supply voltage and power input) are indicated on
►
the product rating plate.
Make sure that the electrical system is earthed, complies with all
►
applicable law and that the (electricity) socket is compatible with the
plug of the appliance.Otherwise,seek qualified professional assistance.
The use of converters,multiple sockets or extension cords is strongly
►
advised against.
►
Before cleaning or maintaining the washing machine,unplug the appli-
ance and turn off the water tap.
Do not pull on the power cord or appliance to unplug the machine.
►
Make sure there is no water in the drum before opening the door.
►
WARNING!
Water may reach very high temperatures during the wash cycle.
Do not expose the washing machine to rain, direct sunlight or other
►
weather elements. Protect from possible freezing.
When moving,do not lift the washing maching by the knobs or deterg-
►
ent drawer;during transport,never rest the door on the trolley.
We recommend two people lift the washing machine.
In the event of fault and/or malfunction, turn off the washing machine,
►
close the water tap and do not tamper with the appliance.
Immediately contact the customer service centre and only use original
spare parts.Failure to observe these instruction may jeopardise applia-
nce safety.
1-Safety information
5