Hoover H7W4 48MBC-S Manual page 33

EN
10-7
10-6
10-8
10-9
10-11
10-10
10-13
10-12
10-Care and cleaning
10.5 Long periods of disuse
If the appliance is left idle for a longer period:
1. Pull out the electrical plug (Fig. 10-6).
2. Turn off water supply (Fig. 10-7).
3. Open the door to prevent formation of moisture
and odours. Let door open while not used.
Before next usage check carefully power cord, water
inlet and drain hose. Make sure everything is properly
installed and without leackage.
10.6 Pump filer
Clean the filter once a month and check the pump
filter for instance if the appliance:
 Doesn't drain the water.
 Doesn't spin.
 Cause unusual noise while running.
WARNING!
Scalding Risk! Water in the pump filter can be very
hot! Before any action please ensure water has
cooled down.
1. Turn off and unplug the machine (Fig.10-8).
2. Open service flap.You can either use a coin or
a screwdriver (Fig. 10-9).
3. Provide a flat container to catch leach water (Fig.
10-10). There could be bigger amounts!
4. Pull the drainhose out and hold its end above the
container (Fig. 10-10).
5. Take the sealing plug out of the drainhose (Fig. 10
-10).
6. After complete drainage close drainhose (Fig. 10-
11). and push it back into the machine.
7. Unscrew and remove counter clockwise the pump
filter (Fig. 10-12).
8. Remove contaminants and dirt (Fig. 10-13).
33