Hoover H7W4 48MBC-S Manual page 23

EN
RINSE
This program performs 2 rinses with an intermediate spin (which can be reduced or
excluded by using the appropriate button). It is used for rinsing any type of fabric, for
example after a wash carried out by hand.
REMOTE CONTROL (Wi-Fi)
Position that you have to select when you want to enable / disable remote control
through the App, via Wi-Fi. In this case, the start of cycle will take place through the App
commands. More details in the REMOTE CONTROL (Wi-Fi) section.
COTTONS
This programme is suitable for washing coloured cotton garments at 40°C or for ensuring
the highest degree of cleanliness for cotton resistant laundry washing at 60°C or 90°C.
The final spin is at maximum speed that ensures excellent water removal.
ECO 40-60
The ECO 40-60 programme is able to clean normally soiled cotton laundry declared to be
washable at 40°C or 60°C, together in the same cycle. This programme is used to assess
the compliance with the EU Ecodesign legislation (environmentally friendly products
design).
WOOL & HAND WASH
This programme performs a wash cycle dedicated to the wool fabrics that can be washed
in a washing machine, the articles to be washed by hand.
20°C
This innovative programme, allows you to wash different fabrics and colours together,
such as cottons, synthetics and mixed fabrics at only 20°C and provides an excellent
cleaning performance.
SYNTHETIC & COLOURED
This programme allows you to wash different fabrics and different colours all together.
The rotation movement of the drum and the water levels are optimized, both during the
washing the rinsing phase. The accurate spin action, ensures a reduced formation of
creases in the fabrics
DRAIN & SPIN
The program completes the drain and a maximum spin. It is possible to delete or reduce
the spin through the SPIN SELECTION button.
Note: The procedure to check the number of cycle that the
machine has run.
Procedure:under standby mode,select "DRAIN & SPIN" programme first,then press
"speed" and "delay" at the same time,it will display the number of running cycle for 2
seconds,and then back to standby interface.The cumulativer running cycles will add
after the programme ends.The running cycles will be displayed in hexadecimal it is
over 9999.
6-Programmes
23