Hoover H7W4 48MBC-S Manual page 18

5-Control panel
5-13
5-14
18
-STEAMLEVEL
 After selecting the STEAM CARE PRO programme, you can use
this button to choose between three steam treatments of
different intensities, designed only for dry garments and
depending on the type of fabric:
(default selection)
-COTTON
This programme is used for cotton garments. The cycle refr-
eshes and relaxes creases in
suitable for dry fabrics.
-SYNTHETIC (press button once)
This programme is used for synthetic garments. The cycle re-
freshes and relaxes creases in garments after use.The cycle is
suitable for dry fabrics.
-DELICATES (press button twice)
The cycle is suitable for soft fabrics.The cycle refreshes and
relaxes creases in garments after use.The cycle is suitable
for dry fabrics.
5.5.8 Function button "
Yes
Optional
No
MAX KG
8 9 10
KG KG KG
1 1 2 2
ACTIVE WASH
4 4 5 6
NIGHT & DAY
- - -
DRUM CLEAN
 This button (Fig.5-14) allows you to choose between three
different options (available for some programmes only):
- ACTIVE WASH
 ACTIVE WASH is designed for reduced loads and lightly soiled
garments, aiming to limit the unnecessary waste.
- NIGHT & DAY
 Selecting this program will turn off the beep except for the alarm,
reduce and the intermediate spin speed.
 The laundry keep immersed in water after the final rinse, in order
to spread the fiber perfectly.During the drum water retention
phase,the machine will pause the timing.Press START to end the
cycle with the spin and drain phase.
- DRUM CLEAN
 This program can carry out the self-cleaning of the washing
machine.
garments after use.The cycle is
"
SPECIAL PROGRAMMES
12
1 2 3
KG
30 30 1000 1000
40 60 800 1000
-
90 90 400 400
3
1
2
EN