Hoover H7W4 48MBC-S Manual page 10

2-Installation
2-10
WARNING!
Ensure always that all connections (power supply, drain and fresh water hose) are

film, dry and leack free!
Take care these parts are never to be crushed, kinked, or twisted.

If the supply cord is damaged, it must be replaced by the service agent (see

warranty card) in order to avoid a hazard.
10
2.8 Electrical Connection
Before each connection check if:
power supply, socket and fusing are appropriate

to the rating plate.
the power socket is earthed and no multi-plug or

extension are used.
the power plug and socket are strictly according.

Only UK: The UK plug meets BS1363A standard.

Put the plug into the socket (Fig. 2-10).
EN