Hoover H7W4 48MBC-S Manual page 20

5-Control panel
5.6.2 Change the language
 If you want to change the setting language you will have to press simultaneously "Delay"
and "Option" buttons for about 5 seconds, the language choose last time will appear on
display,and you will be able to choose a new language (by pressing button "speed" or
"temperature" ).

Confirm by pressing the START/PAUSE button.
5.6.3 Choosing the type of detergent used
Thanks to Eco Doser, the appliance is able to suggest the optimal amount of washing

detergent to pour into the drawer based on the actual load.
 In order for the Eco Doser to work properly, it is necessary to select the type of deter-
gent used, choosing between normal or concentrated liquid detergent or powder
detergent.
 Press "speed" or "temperature" button to display the available options and press
START/ PAUSE to confirm your choice.
5.6.4 Changing the type of detergent used
If you wish to change the type of detergent used, you will need to press and hold down

"Delay" and "Option" buttons simultaneously for about 5 seconds. The display shows
the detergent selection option again.
 Press "speed" or "temperature" button to display the available options and press
START/ PAUSE to confirm your choice.
5.6.5 Setting the Water hardness level
In order to make some automatisms of the appliance work correctly, it is necessary to

set the Water Hardness level.
Note:
The default setting for the water hardness is set in the factory at level 2 (L2)
as this satisfies the requirements of the majority of users.
Water Hardness level:
L1 = LOW (0-12 °fH o 0-7 °dH)
L2 = MEDIUM (13-30 °fH o 8-17 °dH)
L3 = HIGH (≥ 30 °fH o ≥ 17 °dH)
 To confirm the standard water hardness level set by the factory, press START/PAUSE
button.
If you want to change the standard water hardness setting, press the "speed" or "tem-

perature" button.
 Once chosen the water hardness level, confirm by pressing the START/PAUSE button.
5.6.6 Changing the Water hardness level setting
 If you wish to change the type of detergent used, it is necessary to first go through the
language and type of detergent change menu (and change the language and type of
detergent used)by holding down "Delay and "Option" buttons simultaneously for about
5 seconds.
 Once you have configured the language (and the type of detergent used) as explained in
the dedicated paragraphs, you can select the desired water hardness level using button
"speed" or "temperature" button.
 Confirm by pressing the START/PAUSE button.
Note:
Check the water hardness LEVEL of your city at your water supply company.
20
"
EN