11-Troubleshooting - Hoover H7W4 48MBC-S Manual

Hide thumbs Also See for H7W4 48MBC-S:
Table of Contents

Advertisement

EN
10-Troubleshooting
Many occuring problems could be solved by yourself without specific expertise. In case of
a problem please check all shown possibilities and follow below Instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
 Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
 Electrical equipment should be serviced only by qualified electrical experts, because
improper repairs can cause considerable consequential damages.
 A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
11.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code
Message
1:25
The remaining wash cycle time will be 1 hour and 25 minutes.
6:30
The remaining delay time will be 6 hours and 30 minutes.
Function child lock is activeted.
CHILD LOCK ON
Function child lock is not activated.
CHILD LOCK OFF
End
The washing cycle is finished.The appliance shuts off automatically.
Lock
Door is closed because of high water level,high water temperature or spinning cycle.
SOUND OFF
The buzzer is deactivated.
SOUND ON
The buzzer is activated.
11.2 Troubleshooting with display code
Problem
Cause
CLR FLTR
• Drainage error, water is not fully
drained within 6 minutes.
E2
• Lock error.
E4
• Water level not reached after 12
minutes.
• Drain hose is self-syphoning.
E8
• Water protective level error.

11-Troubleshooting

Solution
• Clean pump filter
• Check drain hose installation.
• Shut the door properly.
• Make sure that tap is fully opened and
water pressure is normal.
• Check drain hose installation.
• Contact the After sales service.
35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

H7w449ambc-s

Table of Contents