Notes On Possible Severe Personal Injury - Samson TROVIS 6495-2 Mounting And Operating Instructions

Referenced standards, directives and regulations
The TROVIS 6495-2 Industrial Controller with a CE marking fulfills the requirements of the
Directives 2014/30/EU and 2014/35/EU.
The TROVIS 6495-2 Industrial Controller with an EAC marking fulfills the requirements of the
Regulations TR CU 004/2011 and TR CU 020/2011.
The 'Certificates' section contains this declaration of conformity and TR CU certificate.
The controller is designed for use in low voltage installations.
Î For wiring, maintenance and repair, observe the relevant safety regulations.
Referenced documentation
The documentation for the TROVIS 6495-2 Industrial Controller consists of the Mounting and
Operating Instructions EB 6495-2 and the Configuration Manual u KH 6495-2.
These instructions EB 6495-2 describe the installation, electrical wiring and operation of the
controller. In addition, EB 6495-2 includes a list of all configuration settings.
The Configuration Manual u KH 6495-2 describes the controller's functions in detail. The
control modes are explained using examples of applications. The TROVIS-VIEW 4 software is
explained in detail in the Operating Instructions u EB 6661.

1.1 Notes on possible severe personal injury

DANGER
!
Risk of fatal injury due to electric shock.
Î Before connecting wiring, performing any work on the device or opening the de-
vice, disconnect the supply voltage and protect it against unintentional reconnec-
tion. Make sure that the contacts of the digital outputs are voltage-free.
Î Only use power interruption devices that can be protected against unintentional re-
connection of the power supply.
Î Do not remove any covers to perform adjustment work on live parts.
EB 6495-2 EN
Safety instructions and measures
1-3