Samson TROVIS 6495-2 Mounting And Operating Instructions page 70

Operation
Notes concerning the readings in the info menu
− Inputs/outputs menu item
Directly after the digital inputs and outputs, the state of the input/output is indicated: (0)
or (1)
In the case of a reversed digital input or output, the state of the input/output in reversed
form is additionally indicated: inv.(1) or inv.(0)
− Last events menu item
8-6
The controller assigned to the input/output is
indicated on the right of the display ([1] or [2])
in the reading of analog inputs, digital inputs,
analog outputs, switching outputs and digital
outputs. If the input/output is assigned to both
controllers, both controller numbers ([1; 2]) are
indicated.
Additional readings apply to the digital inputs
(separate or combined with the controller num-
ber):
− [O] indicates that the digital input is as-
signed to an output.
− [X] indicates that the digital input activates
the key locking.
Additional readings apply to the digital outputs
(separate or combined with the controller num-
ber):
− [I] indicates that the digital output is activat-
ed by a digital input.
− [O] indicates that another digital output has
been assigned as the source to the digital
output.
Any events that occur are logged and time-
stamped. The last event is always listed first.
EB 6495-2 EN