Samson TROVIS 6495-2 Mounting And Operating Instructions page 133

C.2.2 Set point switchover
Con-
troller
C.2.2.2 Changeover to external set point with DI
<C.2.1.2≠0>; M.1-3: Controller [2] only
[1] [2] -0 Off
[1] [2] -1 With digital input DI1
[1] [2] -2 With digital input DI2
[1] [2] -3 With digital input DI3
[1] [2] -4 With digital input DI4
C.2.2.3 Open cascade with DI <M.1-3>
[1] -0 Off
[1] -1 With digital input DI1
[1] -2 With digital input DI2
[1] -3 With digital input DI3
[1] -4 With digital input DI4
C.2.2.4 Tracking SPI to SPE/SPC <C.2.1.2≠0>
[1] [2] -0 Off
[1] [2] -1 On
C.2.2.5 Incremental/decremental set point change
<M.1-3>
[1] [2] -0 Off
[1] [2] -1 With digital input DI1, 2
[1] [2] -2 With digital input DI3, 4
[1] [2] K10.A Incremental value
<C.2.2.4≠0>
[1] [2] K10.B Decremental value
<C.2.2.4≠0>
C.2.2.6 Set point increase/decrease by constant
[1] [2] -0 Off
[1] [2] -1 With digital input DI1
[1] [2] -2 With digital input DI2
[1] [2] -3 With digital input DI3
[1] [2] -4 With digital input DI4
[1] [2] K10 Incremental/decremental value <C.2.2.6≠0>
EB 6495-2 EN
Annex A (configuration guide)
[–999.0 ... 9999.0]
[–999.0 ... 9999.0]
[–999.0 ... 9999.0]
Default Setting
setting
[1] [2]
C.2.2.2-0
C.2.2.3-0
C.2.2.4-0
C.2.2.5-0
0.0
0.0
C.2.2.6-0
0.0
16-23