Samson TROVIS 6495-2 Mounting And Operating Instructions page 159

O.2 Analog output AO2
-17 [1] Set point SP0
-18 [1] Error signal +/–e
-19 [1] Abs. error signal |e|
-20 [1] Set point ratio SPR <M.1-2/-6>
-21 [1] Actual ratio PVR <M.1-2/-6>
-22 [2] Input PV before filter <M.1-3/-4/-5/-6, 2C.1.1.1≠0>
-23 [2] Input PV after function generation <M.1-3/-4/-5/-6, 2C.1.1.1≠0>
-24 [2] Actual value PV0 <M.1-3/-4/-5/-6, 2C.1.1.1≠0>
-25 [2] Input SPE before filter <M.1-3/-4/-5/-6, 2C.1.2.1≠0>
-26 [2] Input SPE after function generation <M.1-3/-4/-5/-6, 2C.1.2.1≠0>
-27 [2] Input DV before filter <M.1-3/-4/-5/-6, 2C.1.3.1≠0>
-28 [2] Input DV after function generation <M.1-3/-4/-5/-6, 2C.1.3.1≠0>
-29 [2] Input TR before filter <M.1-3/-4/-5/-6, 2C.1.4.1≠0>
-30 [2] Input TR after function generation <M.1-3/-4/-5/-6, 2C.1.4.1≠0>
-31 [2] Input FB before filter <M.1-3/-4/-5/-6, 2C.1.5.1≠0>
-32 [2] Signal A <M.1-3/-4/-5/-6, 2C.3.2.1≠0, 2C.3.2.3≠0>
-33 [2] Signal B <M.1-3/-4/-5/-6, 2C.3.2.3≠0>
-34 [2] Set point SP0 <M.1-3/-4/-5/-6>
-35 [2] Error signal +/–e <M.1-3/-4/-5/-6>
-36 [2] Abs. error signal |e| <M.1-3/-4/-5/-6>
-37 Output master controller YM <M.1-3>
-38 Y1*Y2*AO2.KM/100 <M.1-5/-6>
-39 (100–Y1)*Y2*AO2.KM/100 <M.1-5/-6>
AO2.FX Constant output value <O.2.1-4>
A02.KM Constant, mixing operation <O.2.1-38/-
39>
O.2.2 Output signal <O.2.1≠0>
-1 4-20 mA
-2 0-20 mA
-3 0-10 V
-4 2-10 V
AO2.MIN Minimum output value
AO2.MAX Maximum output value
EB 6495-2 EN
Annex A (configuration guide)
[–10.0 ... 110.0 %]
[0.0 ... 100.0]
[–10.0 ... 110.0 %]
[–10.0 ... 110.0 %] 100.0 %
Default Setting
setting
0.0 %
1.0
O.2.2-1
0.0 %
16-49