Calibrating The Lc/Tq (Checktune) - Agilent Technologies 6475 User Manual

3 Tuning

Calibrating the LC/TQ (Checktune)

Calibrating the LC/TQ (Checktune)

A Checktune can be run with the following ion sources: ESI, AJS ESI, MMI, and
APCI. The MMI source is only supported with the Ultivo and 6475 LC/TQs.
Checktune is automatically run in both positive polarity and negative polarity.
1 If necessary, open the Method Editor window.
2 Click the TQ tab.
3 Click the Tune > Autotune section in the left pane.
4 Click
5 Click
6 When the tune completes, review the report.
7 Click
Agilent 6475 Triple Quad LC/MS System User Guide
in the toolbar in the Autotune section. This button locks control of
the TQ instrument. You cannot start a single sample run or a worklist when
Tune has control of the TQ instrument.
in the toolbar in the TQ Autotune section.
in the toolbar to release control of the TQ instrument.
30