Agilent Technologies 6475 User Manual page 55

4 Basic Operation
Setting Up and Running an Acquisition Method
8 Set up the Properties for this method.
9 Save the method.
10 Set up and run interactive samples:
Agilent 6475 Triple Quad LC/MS System User Guide
c Optional. On the Quant tab, Mark the Quant Automation check box. The
name of the current Quantitative Analysis method is shown in the list. If
you want to change the Quantitative Analysis method that is connected,
click browse to select a different method. When the Data Acquisition
method is saved, the Quantitative Analysis method that you selected is
copied or linked to the Data Acquisition method.
d Optional. Mark the Generate Report check box on the Quant tab. Then, you
select the Method Path / Template File to use. If you want to print the
report, mark the Print to default printer check box. You can also mark the
Publish check box to create a CSV file, a TXT file, or a PDF file.
a Select the Properties tab.
b Click browse to select the Pre Run Script.
c Click browse to select the Post Run Script.
d Type the Description for this method.
a Click Save As or Save.
b If User Management & Audit Trail or Compliance (with ECM) is enabled,
enter the Reason for creating a new version of this method. Click OK.
c If necessary, name the method and click OK.
a Click the Sample Run window.
b Enter the Sample Name, the Data File Name, the Path and other values.
55