Standby Mode - Agilent Technologies 6475 User Manual

2 Hardware Overview

Standby mode

Standby mode
Standby mode lets the instrument remain idle for period lasting from minutes to
days. Put the instrument in Standby mode when it is not in use or when you want
to change the ion source.
When the instrument is in Standby mode:
• The source interface is ON, the drying gas remains heated, and nebulizer
• The source and ion optics voltages are turned OFF, and the mass
• The LC/MS high voltage electronics are ON.
• For APCI and multimode sources: The vaporizer gas heaters are turned down.
• For the Agilent Jet Stream (AJS) source: The sheath gas temperature, drying
• The spray chamber high voltages are turned OFF.
• The mass spectrometer stop generating spectra.
Agilent 6475 Triple Quad LC/MS System User Guide
flows are maintained.
spectrometer is not sending spectra to the computer.
gas flow, and drying gas temperature are reduced.
21